Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

SUBSCRIPTION MANAGEMENT

发行征订

首页 >> 发行征订 >> 征订方式

三绕组变压器差动电流计算与差动保护新技术

来源:电工电气发布时间:2020-05-14 13:14浏览次数:856
三绕组变压器差动电流计算与差动保护新技术
 
罗璐1,谢芸1,谭正奎2
(1 昆明铁道职业技术学院,云南 昆明 650208;2 中国铁路昆明局集团有限公司昆明供电段,云南 昆明 650208)
 
    摘 要:变压器调挡过程中往往由于差动保护定值整定时的变压器挡位与实际运行挡位不一致产生差流,并触发差动保护相关告警,威胁电网稳定运行。以一起某110 kV变电站三绕组变压器差动保护CT报警缺陷处理实例为依据,介绍了故障排查步骤,并以现场保护二次电流记录为基础,探讨了三绕组变压器差动电流大小计算方法,采用工作现场数据计算变压器差动保护告警时的差流大小,为类似事件的计算分析提供参考,并提出预防措施。
    关键词:变压器差动保护;三绕组变压器;变压器调挡;CT 报警
    中图分类号:TM423     文献标识码:A     文章编号:1007-3175(2020)05-0043-04
 
Calculation of Three-Winding Transformer Differential Current and New Differential Protection Technology
 
LUO Lu1, XIE Yun1, TAN Zheng-kui2
(1 Kunming Railway Vocational Technical College, Kunming 650208, China;
2 Kunming Section for Power Supply of China Railway Kunming Group Co., Ltd, Kunming 650208, China)
 
    Abstract: In the process of shifting gears of transformer, differential current is often caused by the inconsistency between the gear at the differential protection value setting of the transformer and the gear in the actual operation of the transformer, with differential protection alarm triggered, which will threaten the stable operation of power grid. In an example of CT alarm defect treatment of differential protection of three-winding transformer in a 110 kV substation, this paper introduced the troubleshooting steps, and discussed the calculation method of differential current of three-winding transformer based on the records of secondary current in field protection, where the field data was used to calculate the differential current when transformer differential protection alarm was triggered, so as to provide references for the calculation and analysis of similar events as well as the preventive measures.
    Key words: transformer differential protection; three-winding transformer; transformer gear shifting; CT alarm
 
参考文献
[1] 谭雨珍,程本良,孙世磊,等. 主变压器差动保护误动故障实例分析[J]. 山东电力技术,2016,43(12):42-45.
[2] 李智. 自耦变压器差动保护动作原因分析及判断[J]. 电气化铁道,2018(4):79-83.
[3] 程强,贾景东,李社勇. 一起220 kV变压器差动保护误动事故分析[J]. 山西电力,2017(2):5-8.
[4] 孟建英,荀华,郭红兵. 变压器差动保护动作原因分析[J]. 内蒙古电力技术,2017,35(1):95-100.
[5] 罗璐,张春刚. 无功功率就地补偿对变压器调档过程的影响分析[J]. 电气技术,2019,20(4):86-90.
[6] 宁铎,尤磊,李英春,等. 变压器差动保护动作特性的仿真研究[J]. 电力系统保护与控制,2017,45(4):99-106.
[7] 姚东晓,张凯,贺要锋,等. 变压器多特征励磁涌流识别方案研究[J]. 电力系统保护与控制,2017,45(13):149-154.
[8] 兰生,张小钒. 基于多判据的变压器差动保护方法[J]. 电力系统保护与控制,2015,43(23):125-131.
[9] 翁汉琍,王胜,林湘宁,等. 基于波形相似度的抗电流互感器饱和变压器相位差动保护[J]. 电力系统自动化,2019,43(4):132-138.
[10] 黄婷,郑涛,陆格野,等. 变压器差动保护的P 级电流互感器“同型”匹配方法[J]. 电力自动化设备,2017,37(7):213-219.
[11] 金瑞,鲍斌,时伯年. 变压器差动保护的三种比率制动方式及其系数整定的研究[J]. 电力系统保护与控制,2018,46(19):81-87.
[12] 郑涛,陆格野,黄婷,等. 特高压有载调压变压器差动保护自适应算法[J]. 电工技术学报,2017,32(20):271-280.
[13] 曾杰,张禄亮,吴青华. 基于形态学骨架的变压器差动保护[J]. 电力系统自动化,2017,41(23):68-76.
[14] 陆明,薛磊,余江,等. 变压器零序差动保护的分析和改进[J]. 南方电网技术,2018,12(10):35-40.
[15] 王雪,王增平. 变压器电压差动保护方法研究[J].电力系统保护与控制,2013,41(4):67-72.