Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

SUBSCRIPTION MANAGEMENT

发行征订

首页 >> 发行征订 >> 征订方式

智能变电站虚拟测控单元自适应加载技术研究

来源:电工电气发布时间:2021-05-25 09:25浏览次数:518

智能变电站虚拟测控单元自适应加载技术研究

蔡亮亮,龚世敏,唐斌,李帅,洪莹,袁泉
(南京国电南自电网自动化有限公司,江苏 南京 211100)
 
    摘 要:冗余测控中的虚拟测控单元大部分时间是处于后备休眠状态,硬件利用率很低。介绍了一种虚拟测控单元自适应加载技术,可通过实时监测实体测控的运行状态自动规划虚拟测控单元的 CPU 资源部署,并通过任务的卸载、新配置载入、重启相关任务的方式实现冗余测控装置中各虚拟测控单元功能的动态释放和重载。给出了装置硬件设计及软件架构,并对动态加载原则进行了阐述,通过该技术可以高效地复用硬件资源,大幅降低冗余测控装置的制造成本。
    关键词:冗余测控;虚拟测控单元;实体测控;功能后备;自适应加载
    中图分类号:TM63     文献标识码:A     文章编号:1007-3175(2021)05-0047-05
 
Research on Adaptive Loading Technology of Virtual Measure-Control
Units in Smart Substation
 
CAI Liang-liang, GONG Shi-min, TANG Bin, LI Shuai, HONG Ying, YUAN Quan
(Nanjing SAC Power Grid Automation Co., Ltd, Nanjing 211100, China)
 
    Abstract: The virtual measure-control unit of redundancy measure-control device, most of the time, is in the back-up and dormant state,and the rate of hardware utilization is low. This paper introduces an adaptive loading technology of virtual measure-control unit. It is a technology that is able to automatically arrange the CPU resource deployment of the virtual measure-control unit through the real-time monitoring of the physical measure-control device, and it can achieve the function of dynamic release and reloading of the virtual measure-control units within the redundancy measure-control device by unloading tasks, loading new configurations, and restarting related tasks. The hardware design and software architecture of this technology is presented, and the principles of dynamic loading is described. When adopting this technology, hardware resources can be reused efficiently, and the manufacturing cost of redundancy measure-control device can be slashed.
    Key words: redundancy measure-control device; virtual measure-control unit; physical measure-control device; function backup; adaptive loading
 
参考文献
[1] 李峰,易永辉,陶永健,等. 智能变电站测控技术方案研究[J]. 电测与仪表,2013(7) :118-122.
[2] 邵茜楠. 智能变电站的应用现状及前景综述[J] .华电技术,2016,38(9) :41-43.
[3] 高东学,智全中,朱丽均,等. 智能变电站保护配置方案研究[J] . 电力系统保护与控制,2012,40(1) :68-71.
[4] 蒋正威,杜奇伟,刘永新,等. 智能变电站集群测控系统的研究及应用[J] . 电力科学与工程,2014,30(11) :27-30.
[5] 孙一民,刘永新,章立宗,等. 智能变电站测控功能集中式冷备用装置的研制[J] . 电力系统自动化,2015,39(18) :107-110.
[6] 文博,蔡勇,严守道,等. 智能变电站集中式后备测控技术研究[J]. 湖北电力,2018,42(1) :22-27.
[7] 陈芳园,张冬松,王志英. 异构多核处理器体系结构设计研究[J] . 计算机工程与科学,2011,33(12) :27-36.
[8] 彭蔓蔓,徐立超,王颖. 异构多核处理器的任务分配及能耗的研究[J] . 计算机应用研究,2010(5) :1729-1731.
[9] 曹折波,李青. 多核处理器并行编程模型的研究与设计[J] . 计算机工程与设计,2010,31(13) :2999-3002.
[10] 赵勇,石光,杨经超,等. 智能变电站的运维调试研究[J]. 信息通信,2014(1) :275-276.
[11] 王永福,张方正,王亚飞,等. 采用虚拟化技术的智能变电站间隔层集群测控装置研制[J] . 电力系统自动化,2019,43(13) :169-176.
[12] 莫阮清.220 kV 智能变电站二次系统结构与设备配置[J] . 电子技术与软件工程,2016(24) :226-227.
[13] 徐春霞,张艳霞,葛跃田. 智能变电站过程层网络数据流的分析与研究[J] . 中国电力,2013,46(8) :153-159.
[14] 樊陈,倪益民,窦仁辉,等. 智能变电站过程层组网方案分析[J]. 电力系统自动化,2011,35(18) :67-71.
[15] 王璐. 智能变电站过程层组网分析与应用[J] . 电力系统保护与控制,2012,40(2) :141-144.
[16] 陶文伟,高红亮,杨贵,等. 智能变电站过程层冗余组网模式及网络延时累加技术研究[J] . 电力系统保护与控制,2018,46(8) :124-129.
[17] 易永辉,王雷涛,陶永健. 智能变电站过程层应用技术研究[J] . 电力系统保护与控制,2010,38(21) :1-5.
[18] 蔡亮亮,龚世敏,唐斌,等. 智能变电站虚拟后备测控单元自动投退及无缝切换技术研究[J] . 华电技术,2019(10) :30-34.