互感器二次回路施工验收常见问题分析及防范
史文玎，杨奇
(山西潞光发电有限公司，山西 长治 046600)
摘 要：对某火电厂施工调试期间发生电压互感器一次设备布置差异导致相序相反、一次电压与二次电压相位相反，及电流互感器不同准确级的二次绕组使用错误，不同零序电流互感器对应负荷接线错误等问题，提出了比对设备出厂图纸与设计院图纸差异，规范二次回路接线，设备带电后进行电压与电流暂态、稳态幅值相位检查，对比直流电阻值及伏安特性参数等施工注意事项及验收的方法，有效确保了回路接线的正确性。
关键词： 互感器；二次绕组；布置顺序；直流电阻
中图分类号：TM45 文献标识码：B 文章编号：1007-3175(2024)01-0038-04
Analysis and Prevention of Common Problems in Construction and
Acceptance of Secondary Circuit of Mutual Inductor
SHI Wen-ding, YANG Qi
（Shanxi Luguang Power Generation Co., Ltd, Changzhi 046600, China）
Abstract: This paper is based on the difference in the layout of the primary equipment of the voltage mutual inductor during the construction and commissioning of a thermal power plant, which leads to the opposite phase sequence, the opposite phase of the primary voltage and the secondary voltage, the wrong use of the secondary winding of the current mutual inductor with different accuracy levels, and the wrong wiring of the corresponding load of different zero-sequence current mutual inductors. The method of comparing the difference between the factory drawing and the design institute drawing, standardizating the secondary circuit wiring, checking the voltage and current transient and steady-state amplitude phase after the equipment is charged, comparing the DC resistance value and voltammeter characteristic parameters and other construction considerations and acceptance are put forward, which effectively ensures the correctness of the circuit wiring.
Key words: mutual inductor; secondary winding; arrangement order; DC resistance
参考文献
[1] 余云光，何磊，余炜. 电压互感器错误接线分析与防范措施探索[J] . 云南电力技术，2019，47(5) ：81-85.
[2] 杨奇. 一起发电机定子接地保护误发信号的案例分析[J]. 电工电气，2022(5) ：74-76.
[3] 杨杰，徐智，郑庆荣. 电流互感器二次回路相关故障及应对措施探究[C]//中国水力发电工程学会自动化专委会 2021 年年会暨全国水电厂智能化应用学术交流会论文集，2021.
[4] 张敏，宋艳伟，曾群文. 电流互感器二次回路检修方法探究[C]//2022 年电力行业技术监督工作交流会暨专业技术论坛论文集，2022.
[5] 中国电力企业联合会标准化管理中心. 继电保护和电网安全自动装置检验规程：DL/T 995—2016[S]. 北京：中国电力出版社，2018：4.
