电流互感器内置防开路模块故障分析与选型策略
夏鑫，吴秋亮，周世钢
(江苏南瑞帕威尔电气有限公司，江苏 南京 211100)
摘 要：针对近年某地区一起一二次融合 ZW32-12 型柱上断路器的故障进行了技术分析与试验验证，通过录波数据查找事故原因，发现故障发生的根本原因是电流互感器内置防开路模块启动电压的设计余量小。阐述了防开路模块的作用和原理，通过理论计算和试验验证给出了防开路模块启动电压的设计依据。经更换合理启动电压的防开路模块及时避免同类故障的再次发生，提升柱上断路器的入网质量，保障了配网的安全稳定运行。
关键词： 一二次融合柱上断路器；电流互感器；防开路模块；伏安特性；选型策略
中图分类号：TM452 文献标识码：A 文章编号：1007-3175(2024)07-0053-04
Fault Analysis and Selection Strategy of Built-In Anti-Open
Circuit Module of Current Transformer
XIA Xin, WU Qiu-liang, ZHOU Shi-gang
（Jiangsu NARI Power Electric Co., Ltd, Nanjing 211100, China）
Abstract: In recent years, a primary and secondary fusion ZW32-12 type pole circuit breaker failure was technically analyzed and verified by experiments. The accident cause was searched through the recorded wave data, it was found that the root cause of the fault was the small design margin of the starting voltage of the built-in anti-open circuit module of current transformer. In this paper, the function and principle of anti-open circuit module are briefly described, and the design basis of starting voltage of anti-open circuit module is given through theoretical calculation and experimental verification. Replacing the anti-open circuit module with reasonable starting voltage to avoid the recurrence of similar faults in time, and improve the network access quality of the circuit breaker on the column, thus ensuring the safe and stable operation of the distribution network.
Key words: primary and secondary fusion column circuit breaker; current transformer; anti-open circuit module; volt-ampere characteristic;selection strategy
参考文献
[1] 兰剑，王承玉，李庆余. 中国配电开关应关注的发展热点 [J]. 高压电器，2015，51(10) ：217-220.
[2] 王东芳， 黄国权， 黄廷城， 等. 一二次融合柱上开关组合加权模糊状态评价[J] . 浙江电力，2020，39(2) ：48-54.
[3] 王东芳，陶飞达，黄智鹏，等. 一二次融合柱上开关控制可靠性模型与优化设计[J] . 高压电器，2023，59(3) ：86-92.
[4] 黄智鹏，熊洽，陈家超，等. 基于改进层次分析法的柱上开关成套设备状态评估研究[J] . 广东电力，2020，33(3) ：88-94.
[5] 章学兵，梁亚明，夏震，等. 一起柱上真空断路器拒动故障分析[J]. 电力与能源，2022，43(3) ：284-286.
[6] 雷珥梅. CT 伏安特性试验及数据分析[C]//2010 年云南电力技术论坛论文集，2010.
