Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

一起220 kV复合绝缘子芯棒断裂事故分析

来源:电工电气发布时间:2019-03-21 10:21 浏览次数:765
一起220 kV复合绝缘子芯棒断裂事故分析
 
吴旭翔1,王少华2,李特2,周路遥2
(1 国网杭州供电公司,浙江 杭州 310004;2 国网浙江省电力有限公司电力科学研究院,浙江 杭州 310014)
 
    摘 要:复合绝缘子芯棒断裂事故会对输电线路的安全稳定运行构成严重的威胁。结合某 220 kV线路复合绝缘子芯棒断裂事故,对断裂绝缘子及同批次产品进行了外观检查、性能试验、解剖检查、材料试验,分析了绝缘子芯棒断裂的原因及机理。结果表明:该绝缘子端部结构存在缺陷及密封性能不良的问题,导致芯棒玻璃纤维受到酸液侵蚀,逐渐产生应力腐蚀过程,在弱酸腐蚀及应力的共同作用下机械性能不断降低,最终整支芯棒发生断裂。针对芯棒脆断现象和长期机械性能不佳的问题,建议将复合绝缘子端部金具楔式结构逐批更换为压接式结构,并加强端部金具及护套的密封,以及采用无硼纤维耐酸芯棒。
    关键词:复合绝缘子;脆断;应力腐蚀;楔式;压接式
    中图分类号:TM216     文献标识码:A     文章编号:1007-3175(2019)03-0055-04
 
Analysis of a Core Rod Fracture Accident of 220 kV Composite Insulators
 
 WU Xu-xiang1, WANG Shao-hua2, LI Te2, ZHOU Lu-yao2
(1 State Grid Hangzhou Power Supply Company, Hangzhou 310004, China;
2 State Grid Zhejiang Electric Power Research Institute, Hangzhou 310014, China)
 
    Abstract: The composite insulator core rod breakage accident poses a serious threat to the safe and stable operation of the transmission line. This paper combined with the 220 kV composite insulator breakage accident to carry out the visual inspection, performance test, anatomical inspection and material test of the broken insulator and the same batch of products and analyzed the causes and mechanism of the insulator core rod breakage. The results show that the end structure of the insulator has defects and poor sealing performance, which causes the mandrel glass fiber to be corroded by acid solution and gradually produces stress corrosion process. Under the joint action of weak acid corrosion and stress, the mechanical properties are continuously reduced and the whole mandrel ruptures. In view of the brittle fracture phenomenon of the core rod and the long-term poor mechanical properties, it is recommended to replace the composite insulator end fitting wedge structure into a crimping structure batch by batch, and to strengthen the sealing of the end fittings and sheath, and to use boron-free acidproof core rod.
     Key words: composite insulator; brittle fracture; stress corrosion; wedge; crimping
 
参考文献
[1] 梁曦东,高岩峰,王家福,等 . 中国硅橡胶复合绝缘子快速发展历程 [J]. 高电压技术,2016,42(9):2888-2896.
[2] 刘泽洪 . 复合绝缘子使用现状及其在特高压输电线路中的应用前景 [J]. 电网技术,2006,30(12):1-7.
[3] 李超红 . 复合绝缘子芯棒断裂研究现状 [J]. 绝缘材料,2018,51(6):7-11.
[4] 梁曦东,戴建军. 防护复合绝缘子芯棒脆断的方法[J]. 中国电机工程学报,2006,26(10):136-140.
[5] 邵 颖 彪, 卢 明, 马 德 英, 等 . 河 南 电 网 一 起500 kV复合绝缘子断裂故障分析 [J]. 电瓷避雷器,2016(1):34-39.
[6] 王少华,叶自强,罗盛. 500 kV复合绝缘子断裂机理及检测方法 [J]. 中国电力,2011,44(8):19-21.
[7] 关志成,彭功茂,王黎明,等. 复合绝缘子的应用及关键技术研究 [J]. 高电压技术,2011,37(3):513-519.
[8] 陈奇. 高压复合绝缘子应用及老化状态研究综述[J]. 绝缘材料,2016,49(4):7-13.
[9] 卢明,胡文,李黎,等. 交流 500 kV复合绝缘子芯棒断裂原因分析 [J]. 电瓷避雷器,2015(3):23-28.
[10]国家电网公司. 交流架空输电线路用绝缘子使用导则 第 2 部分:复合绝缘子:Q/GDW 515.2—2010[S]. 北京:中国电力出版社,2010:11.
[11]国家能源局. 带电设备红外诊断应用规范:DL/T 664—2016[S]. 北京:中国电力出版社,2016:8-11.
[12]冉学彬,鲁兹,成立,等. 500 kV复合绝缘子脆断事故研究与劣化机理分析 [J]. 高压电器,2013,49(9):35-43.
[13]张福增,宋磊,李锐海,等 . 复合绝缘子断裂原因分析及缺陷评价方法 [J]. 高电压技术,2012,38(11):3093-3100.
[14]国家能源局 . 标称电压高于 1 000 V 架空线路用绝缘子使用导则 第 3 部分:交流系统用棒型悬式复合绝缘子:DL/T 1000.3—2015[ S ] . 北京:中国电力出版社,2015:5.
[15]赵卉,丁庆成,白书杰 . 复合绝缘子压接技术及影响因素 [J]. 电瓷避雷器,2014(4):1-7.
[16]秦国富. 三种复合绝缘子端部附件的连接结构分析[J]. 电瓷避雷器,2004(2):1-6.