Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

一种无刷伺服电机转子磁钢自动化粘接设备的设计

来源:电工电气发布时间:2020-09-17 13:17 浏览次数:63
一种无刷伺服电机转子磁钢自动化粘接设备的设计
 
刘美钧,赵志忠,赵建华,管银,黄桃
(四川航天烽火伺服控制技术有限公司,四川 成都 611130)
 
    摘 要:为了提高电机转子磁钢粘接的合格率和效率,在对无刷伺服电机转子结构和关键参数分析的基础上,设计了一种无刷伺服电机转子磁钢自动化粘接设备。该装置主要由工作台、产品上料区、成品区、搬运机器人、自动装配机构、自动涂胶机构、电气柜等构成。经工艺验证,该设备的成功运用,解决了此前转子磁钢粘接合格率较低的瓶颈,大幅提高了电机生产效率。
    关键词:无刷伺服电机;转子;磁钢;粘接
    中图分类号:TM351     文献标识码:A     文章编号:1007-3175(2020)09-0055-03
Design of an Automatic Bonding Device for Rotor Magnets of Brushless Servomotor
 
LIU Mei-jun, ZHAO Zhi-zhong, ZHAO Jian-hua, GUAN Yin, HUANG Tao
(Sichuan Aerospace Fenghuo Servo Control Technology Corporation, Chengdu 6111 30, China)
 
    Abstract: In order to improve the qualification rate and efficiency of motor rotor magnet bonding, based on the analysis of the structure and key parameters of the brushless servo motor rotor, a brushless servo motor rotor magnet automatic bonding equipment was devised. The device is mainly composed of a workbench, a product feeding area, a finished product area, a handling robot, an automatic assembly mechanism, an automatic gluing mechanism, and an electrical cabinet. After process verification, the successful use of this equipment has solved the previous bottleneck of the low qualification rate of rotor magnet bonding, and greatly improved the production efficiency of the motor.
    Key words: brushless servomotor; rotor; permanent magnet; bonding
 
参考文献
[1] 唐任远. 现代永磁电机理论与设计[M]. 北京:机械工业出版社,1997.
[2] 张之忠. 微电机结构工艺学[M]. 哈尔滨:哈尔滨工业大学出版社,1997.
[3] 林凤卿. 高速永磁电动机转子磁钢表贴固定方式的分析与研究[J]. 新技术新工艺,2018,40(4):64-66.
[4] 闫志刚,朱军,吴景晖,等. 智能涂胶机控制系统设计[J]. 微计算机信息,2009,25(4):18-20.
[5] 张晓瑾,胡斯乐,林粤科. 智能涂胶系统的设计与实现[J]. 机床与液压,2016,44(15):11-14.