Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

两电平静止无功发生器连接电感计算方法研究

来源:电工电气发布时间:2021-04-30 15:30 浏览次数:629

两电平静止无功发生器连接电感计算方法研究

韩文辉
(南京南瑞继保电气有限公司,江苏 南京 211102)

 

    摘 要:连接电感作为静止无功发生器的关键设备,具有存储能量并双向馈送、调节输出电流相位、抑制高次谐波电流等作用,不仅影响静止无功发生器 (SVG) 的动、静态响应,而且还制约着 SVG 的输出功率、功率因数以及直流侧电压。目前 SVG 连接电感的参数选择是从谐波特性和经济性的角度,取其电感标幺值为 0.2 ~ 0.5,没有实际的理论计算依据。从 SVG 无功输出容量和 SPWM 调制比的角度出发,推导出了连接电感的上限值,再综合满足谐波抑制指标时的电感下限值,给出了一种 SVG 连接电感的设计方法。通过仿真验证了采用本方法设计的连接电感值是正确合理的。
    关键词:静止无功发生器(SVG) ;连接电感;计算方法;正弦脉宽调制(SPWM)
    中图分类号:TM761+.1     文献标识码:A     文章编号:1007-3175(2021)04-0022-04
 
Research on Calculation Method of Connecting Inductance of
Two-Level Static Var Generator
 
HAN Wen-hui
(Nari-Relays Electric Co., Ltd, Nanjing 211102, China)
 
    Abstract: Connecting inductance is the key equipment of static var generator, it has the function of storage energy and bidirectional feed,adjusts the output current phase, inhibits the high harmonic current and so on. It not only affects the dynamic and static response of SVG devices, but also restricts the SVG output power, power factor and DC side voltage. Currently, the parameter selection of connecting inductance is from the corner of harmonic characteristics and its economy, in which the inductance value usually taken is 0.2~0.5 p.u., lacking in practical basis for theoretical calculations.This paper deduces the upper limit of connecting inductance from SVG output capacity and SPWM modulation ratio, then gives the designing reference of SVG connecting inductance combining with the lower limit which satisfies the harmonic suppression index. At last, the correctness of the connecting inductance’s design method is verified through simulation.
    Key words: static var generator; connecting inductance; calculation method; SPWM
 
参考文献
[1] 许树楷,宋强,刘文华. 配电系统大功率交流电弧炉电能质量问题及方案治理研究[J] . 中国电机工程学报,2007,27(19) :93-98.
[2] 张鹏,周碧英. STATCOM 在电弧炉补偿中的控制策略及仿真分析[J] . 电气传动自动化,2010,32(6) :16-19.
[3] 张崇巍,张兴.PWM 整流器及其控制[M]. 北京:机械工业出版社,2003.
[4] 马春明,解大,余志文,等. SVG的电压控制策略[J].电力自动化设备,2013,33(3) :96-99.
[5] 江道灼,张振华. 三相H 桥级联静止同步补偿器的控制策略[J] . 高电压技术,2011,37(8) :2024-2031.
[6] 王轩,林嘉扬,滕乐天,等.d -q -0 坐标系下链式 STATCOM 电流控制策略[J] . 中国电机工程学报,2012,32(15) :48-54.
[7] 王轩, 傅坚, 滕乐天, 等. 链式静止同步补偿器电流控制策略[J] . 中国电机工程学报,2012,32(12) :1-6.
[8] 张建国,牟晓春,李阳. 静止同步补偿器偏磁控制方法[J]. 江苏电机工程,2015,34(3) :34-36.
[9] 黄华,陈赤汉,刘磊,等. 静止无功发生器负序补偿时直流电容选择[J] . 江苏电机工程,2013,32(5) :34-37.
[10] 郑征,葛广凯. 三相P W M 整流器交流侧电感的设计[J]. 电气传动,2011,41(3) :24-27.
[11] 巫付专,万健如,沈虹. 基于不同电流跟踪方式 APF 连接电感选取与设计[J] . 电力电子技术,2009,43(8) :7-9.
[12] 同向前,焦妍莹,申炜. 静止同步补偿器滤波电感的选择[J]. 电力电子技术,2007,41(2) :93-95.