Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 往年索引

电子式漏电断路器双应力加速退化试验方案研究

来源:电工电气发布时间:2022-05-28 08:28 浏览次数:366

电子式漏电断路器双应力加速退化试验方案研究

赵兴洲,缪建华,王泽,李想
(河北工业大学 电气工程学院,天津 300130)
 
    摘 要:漏电断路器属于高可靠性、长寿命产品,在短时间内无法获取足够的失效数据对其可靠性进行评估。在不改变漏电断路器失效机理的条件下,提出了双应力交叉步进加速退化试验方案,通过分析漏电断路器的失效机理,确定温度、湿度作为加速应力,选择双应力交叉步进的应力加载方式;根据 Peck 模型中加速因子的计算,选择应力组合方案,通过摸底试验选择性能退化特征量,并确定了试验样品数量、试验周期等试验参数,制定出试验程序。该方案有效解决了电子式漏电断路器可靠性评估试验样本多和试验时间长的问题。
    关键词:电子式漏电断路器;Peck 模型;失效机理;加速因子
    中图分类号:TM561     文献标识码:B     文章编号:1007-3175(2022)05-0053-05
 
Research on Accelerated Degradation Test Scheme with Two Accelerating
Stresses of Electronic Leakage Circuit Breaker
 
ZHAO Xing-zhou, MIAO Jian-hua, WANG Ze, LI Xiang
(School of Electrical Engineering, Hebei University of Technology, Tianjin 300130, China)
 
    Abstract: Residual current circuit breakers are highly reliable and long-life products and therefore it is impossible to obtain sufficient failure data to evaluate their reliability in a short period.This paper proposed a dual-stress cross-step accelerated degradation test scheme under the condition of not changing the failure mechanism of the leakage circuit breaker.It analyzed the failure mechanism of the leakage circuit breaker and determined the temperature and humidity as the acceleration stress. Moreover, it selected the stress loading mode of double stress cross-stepping.This research chose the stress combination scheme according to the calculation of the acceleration factor in the Peck model,elected the characteristic quantity of performance degradation through the bottom-up test. It determined the testing parameter, such as the number of test samples and the test period. Besides, it formulated the test program.This study effectively solves the problems which excessive test samples and tediously long testing time for reliability evaluation of electronic leakage circuit breakers.
    Key words: electronic leakage circuit breaker; Peck model; failure mechanism; acceleration factor
 
参考文献
[1] 肖坤,顾晓辉,彭琛. 基于恒定应力加速退化试验的某引信用 O 型橡胶密封圈可靠性评估[J] . 机械工程学报,2014,50(16) :62-69.
[2] 陈志军,周芳,杨学印,等. 基于加速退化数据的某导电膜电阻贮存寿命预测方法[J] . 空军工程大学学报(自然科学版),2019,20(4) :46-51.
[3] 尹超,周桂法,汪旭,等. 基于加速退化试验的电路板性能退化及可靠性分析[J] . 控制与信息技术,2018(5) :70-73.
[4] 吕萌,蔡金燕,梁玉英,等. 小样本条件下双应力步降加速退化试验优化设计[J] . 中国测试,2014,40(3) :129-132.
[5] 陈金涛,朱彬若,张垠,等. 智能电能表的加速退化试验方案研究[J] . 电测与仪表,2018,55(3) :104-108.
[6] 李贺龙,于海波,何娇兰. 基于数据融合方法的智能电能表运行剩余寿命预测[J] . 电测与仪表,2019,56(18) :126-133.
[7] 李奎,李正广,段宇,等. 基于 Gamma 过程的交流接触器剩余电寿命仿真预测[J] . 电测与仪表,2018,55(16) :105-111.
[8] 李华,孙东旺,贺鹏举,等. 基于超程时间回归模型的继电器寿命预测方法[J] . 电工技术学报,2013,28(S2) :414-417.
[9] 刘帼巾. 剩余电流动作保护器的可靠性研究[D] .天津:河北工业大学,2002.
[10] 武志刚. 漏电断路器可靠性及其失效机理分析[D].天津:河北工业大学,2012.