Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

基于高频暂态的复杂接触网故障测距研究与仿真

来源:电工电气发布时间:2024-08-30 13:30 浏览次数:26

基于高频暂态的复杂接触网故障测距研究与仿真

陈楚楚,毛弥卉,黎萱
(中铁上海设计院集团有限公司,上海 200070)
 
    摘 要:接触网线路在发生故障时快速进行故障点清除对于保障高速列车的稳定运行至关重要。分析了传统的接触网故障测距方法以及测距方法中存在的问题,提出了一种适用于复杂线路的高频暂态故障测距方法,该方法在进行接触网故障测距时,采用接触网线路参数模型确定波速度以及合适的数学方法查找波头,可实现主支线故障区分。选取上海铁路局某复杂自耦变压器(AT)供电线路进行仿真验证,仿真结果表明,基于高频暂态的复杂接触网故障测距方法具有良好的系统适应性,为复杂结构的供电线路故障测距提供了理论依据。
    关键词: 接触网;故障测距;复杂结构;高频暂态;AT 供电;直供线路
    中图分类号:TM721.3 ;U226.8     文献标识码:A     文章编号:1007-3175(2024)08-0048-06
 
Research and Simulation of Complex Catenary Fault Location
Based on High-Frequency Transient
 
CHEN Chu-chu, MAO Mi-hui, LI Xuan
(China Railway Shanghai Design Institute Group Co., Ltd, Shanghai 200070, China)
 
    Abstract: It is very important to clear the fault point quickly when the catenary line breaks down to ensure the stable operation of highspeed train. This paper analyzes the existing problems of traditional fault location method for catenary and ranging method, a high-frequency transient fault location method that applys for complex circuits is put forward, when this method is in contact line fault location,it uses catenary line parameter model to comfirm wave speed and searches wave head by proper mathematical methods, then main branch fault classification is realized. A complex auto-transformer (AT) power supply line is selected for simulation verification, the simulation results show that the complex catenary fault location method based on high-frequency transientt has good system adaptability and provides a theoretical basis for the fault location of complex power supply lines.
    Key words: catenary; fault location; complex structure; high-frequency transient; AT power supply; direct supply line
 
参考文献
[1] 黄宏伟. 高速铁路牵引网典型故障特征识别算法研究[D].南昌:东华理工大学,2019.
[2] 徐宇飞. 基于傅里叶变换和小波包变换的电力谐波检测方法的研究[D]. 上海:上海电机学院,2016.
[3] 申元,马仪,孟见刚,等. 基于 BP 神经网络的输电线路故障原因辨识研究[J]. 智能电网,2017,5(2) :134-141.
[4] 韦国. 行波法在电气化铁道牵引网故障测距中的应用[J].电气化铁道,2012,23(2) :21-23.
[5] 牛琼,李东辉,李诗涵. 基于能量比法识别波头的 AT 牵引网故障行波测距的研究[J] . 大连交通大学学报,2017,38(2) :99-103.
[6] 高艳丰,朱永利,闫红艳,等. 一种新型的输电线路双端行波故障定位方法[J] . 电力系统保护与控制,2016,44(8) :8-13.
[7] 董杏丽,董新洲,张言苍,等. 基于小波变换的行波极性比较式方向保护原理研究[J] . 电力系统自动化,2000,24(14) :11-15.
[8] 高仕斌,贺威俊. AT 供电牵引网微机故障测距系统的研究[J]. 铁道学报,1990(4) :23-35.
[9] 霍中原.AT 供电方式接触网故障测距误差分析及对策[J].中国铁路,2017(5) :37-41.
[10] 舒新星,陈剑云,华敏,等. 基于时频谱相似度全并联 AT 牵引网行波测距方法[J] . 铁道学报,2022,44(6) :37-45.
[11] 高仕斌,王伟,陈小川,等.AT 供电牵引网新型微机故障测距原理与应用[J]. 铁道学报,1993,15(4) :19-27.
[12] 焦在滨,高仕斌. 行波法在电气化铁道牵引网故障测距中应用的可行性研究[J] . 继电器,2003,31(7) :33-36.
[13] 江陶然,刘希喆. 基于拓扑变换的非接触式电压传感器[J]. 电工技术学报,2019,34(1) :153-159.
[14] 李宏刚. 电气化铁道牵引网故障测距装置的研究[D] .北京:华北电力大学,2004.
[15] 张重远,唐帅,梁贵书,等. 基于电磁型电压互感器传输特性的过电压在线监测方法[J]. 中国电机工程学报,2011,31(22) :142-148.