互感器现场高压介损测量方法的实现 

郝坤峰1，孙睿贞1， 许冰2，杨子龙2 
(1 驻马店供电公司，河南 驻马店 463000；
2 河南省电力公司检修公司，河南 郑州 450000) 
 

摘 要：串联谐振补偿法用于互感器高压介损测量是解决现场诸多问题的有效方法。利用电抗与容抗的不同性质，串联谐振补偿法可以大大减小试验电源的容量，给出了测试实例，验证了该方法的可行性。在现场使用串联谐振补偿法进行测量要根据被测设备情况合理选择仪器设备和电抗器台数，使其满足试验回路的要求。
关键词：互感器；互感器高压介损；串联谐振补偿法
中图分类号：TM452；TM835.4 文献标识码：A 文章编号：1007-3175(2014)03-0034-03

Implementation of Onsite High-Voltage Mutual Inductor Dielectric Loss Measurement Method 

HAO Kun-feng1, SUN Rui-zhen1, XU Bing2, YANG Zi-long2 
（1 Zhumadian Power Supply Company, Zhumadian 463000, China; 
2 Henan Electric Power Company Maintenance Company, Zhengzhou 450000, China） 
 

Abstract: The connection in series resonance opposition method used to measure high-voltage mutual inductor dielectric loss is an available approach to solve many onsite problems. The different properties between reactance and capacitive reactance were used,so that the connection in series resonance opposition method could reduce the capacity of testing power supply. Experiments verified  the feasibility of this method. According to the situation of measured equipment, the onsite connection in series resonance opposition method needed reasonable selection of apparatus and the number of reactors to meet the requirements of testing circuits.
            Key words: mutual inductor; high-voltage mutual inductor dielectric loss; connection in series resonance opposition method

参考文献
[1] 张一尘.高电压技术[M].2版.北京：中国电力出版社，2000.
[2] 李建明，朱康.高压电气设备试验方法[M].2版.北京：中国电力出版社，2004.
[3] 阎春雨，陈志勇，高骏.电流互感器现场高压介损测量[J].高压电器，2009，45(2)：87-89.
[4] 阎春雨，王永辉，刘海峰，崔拥军.串联补偿法用于电流互感器高压介损测量[J].河北电力技术，2002，21(1)：l-2.