Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 往年索引

基于IEC 61850-9-2采样值传输模型的研究

来源:电工电气发布时间:2016-04-06 10:06 浏览次数:25

基于IEC 61850-9-2采样值传输模型的研究 

倪玉玲,梅军,郑建勇,朱超 
(东南大学 电气工程学院,江苏 南京 210096) 
 

摘 要:IEC 61850 标准定义了采样值传输的抽象模型,应用于采样值传输及相关服务。为了满足该标准对变电站自动化系统以及智能设备所提出的灵活性、互操作性的要求,在研究IEC 61850 信息模型内涵的基础上,对合并单元的信息模型及其映射进行了介绍,构建了合并单元的采样值传输模型;通过预配置采样值控制块,进行IEC 61850-9-2 采样值传输,分析了合并单元配置信息的灵活性,通过实验验证了信息配置的正确性。
关键词:合并单元;采样值传输模型;IEC 61850-9-2;灵活配置
中图分类号:TM45;TN911.6 文献标识码:A 文章编号:1007-3175(2014)05-0051-05


Research of Sampled Value Transmission Model Based on IEC 61850-9-2 

NI Yu-ling, MEI Jun, ZHENG Jian-yong, ZHU Chao 
(School of Electrical Engineering, Southeast University, Nanjing 210096, China) 
 

Abstract: The standard IEC 61850 defines an abstract model of sampled value (SV) transmission, which is applied in SV transmission and the related services. In order to meet the flexibility and interoperability requirements on substation automation systems and smart devices proposed by this standard, based on the study of information model connotation in standard IEC 618 50, this paper introduced the information model and mapping of merging unit, and constructed the SV transmission model of merging unit. By preconfiguring the SV control block, the SV transmission was conducted on the basis of IEC 618 50-9-2 and the flexibility of merging unit’s configuration information was analyzed. The experiment verifies the validity of the information configuration.
       Key words: merging unit; sampled value transmission model; IEC 61850-9-2; flexible configuration


参考文献
[1] 樊陈, 吕晓荣, 高春雷. 基于IEC 61850 过程层总线合并单元的研究[J]. 江苏电机工程,2010,29(2):25-29.
[2] 殷志良,刘万顺,杨奇逊,等.基于IEC 61850标准的采样值传输模型构建及映射实现[J].电力系统自动化,2004,28(21):38-42.
[3] 周小勇,苏麟.智能变电站中采样值传输方式的研究[J].电工电气,2012(7):54-59.
[4] 李九虎,郑玉平,古世东,等. 电子式互感器在数字化变电站的应用[J]. 电力系统自动化,2007,31(7):94-98.
[5] 贺振华,胡少强,李杰祎.IEC 61850 标准下电子式电压互感器的模型构建及映射实现[J]. 继电器,2008,36(2):41-44.
[6] 陈国炎,张哲,尹项根.基于IEC 61850的广域继电保护通信建模[J].电网技术,2012,36(6):56-63.
[7] 高乐,周有庆,欧阳帆. 与电子式互感器接口的合并单元通信模型设计[J]. 电力自动化设备,2008,28(3):111-114.
[8] 高乐, 周有庆, 欧阳帆. 与电子式互感器接口的合并单元通信模型设计[J]. 电力建设,2007,28(12):95-97.
[9] 窦晓波,吴在军,胡敏强,等.IEC 61850 标准下合并单元的信息模型与映射实现[J]. 电网技术,2006,30(2):80-86.
[10] 罗彦,段雄英,邹积岩,等. 电子式互感器中数字同步和数字通信技术[J]. 电力系统自动化,2012,36(9):77-81.
[11] 朱超,黄灿,梅军,等.基于FPGA与ARM的智能合并单元设计[J].电网技术,2011,35(6):10-14.