Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 往年索引

基于单片机的绕组温控仪智能化改造

来源:电工电气发布时间:2016-04-06 11:06 浏览次数:10

基于单片机的绕组温控仪智能化改造 

刘翔宇,董青迅,刘彦琴,胡祥胜,田宇 
(四川省电力公司成都供电公司,四川 成都 610041) 
 

摘 要: 介绍了基于单片机的绕组温控仪智能化改造的背景、原理及软硬件方案。以单片机为主控单元的智能匹配器替代传统的变流器,通过对热模拟实验的闭环控制实现了加热电流的自动调节,从根本上解决了绕组温度测量不准确的问题。测试结果证明该方案适用于各种型号的绕组温控仪的智能化改造,具有较高的应用价值。
关键词: 绕组温控仪;热模拟实验;智能匹配器;单片机;闭环控制
中图分类号:TM401+.2 文献标识码:A 文章编号:1007-3175(2014)07-0024-04


Intelligent Transformation of Winding Temperature Controller Based on Single Chip 

LIU Xiang-yu, DONG Qing-xun, LIU Yan-qin, HU Xiang-sheng, TIAN Yu 
(Chengdu Power Supply Company, Chengdu 610041, China) 
 

Abstract: Introduction was made to the background, principle, software and hardware plan of single chip-based intelligent transformation of winding temperature matcher. The traditional converter was substituted by the intelligent matcher taking the single chip as the main control unit. The closed-loop control of thermal analog experiment realized automatically adjusting of heating current, to solve the problem of winding temperature incorrect measurement fundamentality. The test result shows that the plan is applicable to intelligent transformation of various models of winding temperature controller, with higher application value.
       Key words: winding temperature controller; thermal analog experiment; intelligent matcher; single chip; closed-loop control


参考文献
[1] 冯悦波.一种变压器绕组温度测量方法[J].变压器,2001,38(5):13-14.
[2] 刘翔宇.变压器用绕组温控仪原理及应用[J].四川电力技术,2010,33(1):82-85.
[3] 毛一之,王秀春,韩鹏. 应用绕组测温装置测量变压器绕组温度的必要性和可行性分析[J]. 变压器,2004,41(9):14-17.
[4] 朱金刚,潘志东.基于51系列单片机的串行口扩展技术[J].电测与仪表,2003,40(3):41-42.
[5] 季渊,徐美华,唐智杰.新型单片机水温自适应测控系统[J].自动化仪表,2004,25(9):50-52.
[6] 朱奕丹,倪浩如.基于单片机控制的高精度多点温度检测显示系统[J].自动化仪表,2008,29(8):58-60.
[7] 张玉宝,曹会云,张滨.基于单片机的数控恒流源的设计[J].电测与仪表,2011,48(6):75-78.
[8] 刘瑞华.MCS-51单片机与GPS-OEM板串行通信系统设计[J].仪表技术与传感器,2005(3):53-55.
[9] 刘娇璇.基于80C51单片机的干式变压器温度控制系统设计[J].变压器,2013,50(1):30-32.
[10] 魏泽鼎, 郝琳, 郑惠萍. 基于单片机的荧光寿命法温度测量仪的研究[J]. 仪表技术与传感器,2010(4):26-28.