基于UPQC的三相电流平衡补偿控制
李勇，程汉湘，方伟明，钟榜
（广东工业大学 自动化学院，广东 广州 510006）
摘 要：统一电能质量控制器(UPQC) 控制单元中既要控制静止同步无功补偿器(STATCOM) 又要控制静止同步串联补偿器(SSC)，灵活性和速动性降低且成本较高。对UPQC 补偿装置进行具体的修改，UPQC 的补偿原理主要是通过SSC 交流侧输出一串联的电压以改变负载的实际工作电压，对STATCOM 部分不要实施控制，故将UPQC中STATCOM部分的全控型电力电子器件换成二极管，从而得到了UPQC装置。以广东某一变电站为例，计算并用Matlab 进行了仿真，结果表明，该补偿装置提高了控制的灵活性和速动性，且降低了成本。
关键词：统一电能质量控制器；静止同步无功补偿器；静止同步串联补偿器；平衡补偿；Matlab 仿真
中图分类号：TM714.3 文献标识码：A 文章编号：1007-3175(2016)11-0005-06
Three-Phase Current Balance Compensation Control Based on
Unified Power Quality Conditioner
LI Yong, CHENG Han-xiang, FANG Wei-ming, ZHONG Bang
（Faculty of Automation, Guangdong University of Technology, Guangzhou 510006, China）
Abstract: The control unit of unified power quality conditioner (UPQC) controls both the static synchronous reactive compensator (STATCOM) and the static synchronous series compensator (SSC), which can reduce the flexibility and speed of the device, with relatively high cost. The compensation device of UPQC was carried out concrete modification. The compensation principle of UPQC got through the SSC alternating current side and output a series of voltage to change the actual load voltage, without control to the STATCOM, so that the full controlled power electronic devices of STATCOM part in the UPQC could be replaced by the diodes to obtain the UPQC device. Matlab simulation shows that this compensation device improved the flexibility and speed of control and reduces the costs.
Key words: unified power quality conditioner; static synchronous reactive compensator; static synchronous series compensator; balance
compensation; Matlab simulation
参考文献
[1] 肖湘宁. 电能质量分析与控制[M]. 北京：中国电力出版社，2004.
[2] 同向前，王海燕，尹军. 基于负荷功率的三相不平衡度的计算方法[J]. 电力系统及其自动化学报，2011，32(2)：24-30.
[3] SEDRAOUI C K, AL-HADDAD K, CHANDRA A.Versatile Control Strategy of the Unified Power Flow Controller (UPF)[J].IEEE Transactions on Instrumentation and Measurement，2000，12(7)：142-147.
[4] 周洁，罗安，陈燕东，等. 低压微电网多逆变器并联下的电压不平衡补偿方法[J]. 电网技术，2014，10(2)：412-418.
[5] WANG Siyu, LV Yuanyuan, GAO Qiang.Dynamic Compensation Strategy for the Unbalanced Three-Phase Reactive Power System Based on TSC Device[J].ECCE Asia，2012，37(5)：2823-2827.
[6] 孙红星，何德刚，吴文波. 基于链式SVG三相不平衡负荷的平衡补偿方法的仿真分析[J]. 自动化技术与应用，2014，17(6)：60-64.
[7] IKEDA Y, KATAOKA T.A UPQC-Based Voltage Compensator with Current and Voltage Balancing Function[J].IEEE Transactions on Instrumentation，2005，15(7)：1838-1844.
[8] SEDRAOUI K, AL-HADDAD K, OLIVIER G.Flicker Compensation in Arc Furnace Power Systems Using the UPQC[J].IEEE Transactions on Instrumentation and Measurement，2006，22(1)：9-12.
[9] 王兆安，杨君，刘进军，等. 谐波抑制和无功功率补偿[M]. 北京：机械工业出版社，2005：226-234．
[10] 程汉湘. 柔性交流输电系统[M]. 北京：机械工业出版社，2009．
