基于IEEE Std 80-2000的风电场升压站接地网设计
 

吴之奎，张彦昌，袁晨，林浩，王杰
（中国电力工程顾问集团中南电力设计院有限公司，湖北 武汉 430071）
 

    摘 要：合理的接地网设计对于人身和设备的安全起着至关重要的作用。介绍了国外变电站和发电厂接地网设计常用的《交流变电站接地安全导则》IEEE Std 80-2000。基于该标准，对巴基斯坦某风电场132 kV 升压站接地网设计展开研究，计算了升压站接地电阻、跨步电势、接触电势、地电位升高，并通过利用降阻措施有效解决了跨步电势不能满足要求的问题。
    关键词：IEEE Std 80-2000；风电场；接地网；接触电势；跨步电势；高土壤电阻率
    中图分类号：TM614；TM63     文献标识码：A     文章编号：1007-3175(2017)06-0065-04
 

Grounding Grid Design of Wind Power Plant Booster Station Based on IEEE Std 80-2000

 

WU Zhi-kui, ZHANG Yan-chang, YUAN Chen, LIN Hao, WANG Jie
（Central Southern China Electric Power Design Institute of China Power Engineering Consulting Group Corporation, Wuhan 430071, China）
 

    Abstract: A reasonable grounding grid design is critical to the safety of persons and equipment. Introduction was made to the IEEE Std 80-2000 which was widely used in the design of foreign substations and grounding grid of power plants. Based on the standard, this paper carried out research on the ground grid design of a 132 kV booster station of certain wind power plant in Pakistan and calculated the grounding resistances, step potential, touch potential and grounding potential rise. The problem that the step potential cannot meet the requirement is solved by adopting a resistance reduction strategy.
    Key words: IEEE Std 80-2000; wind power plant; grounding grid; contact potential; step voltage; high soil resistivity
 

参考文献
[1] 黄建波，姚奇，赵末. 基于IEEE Std 80-2000 标准与EDSA 软件的发电厂接地网设计[J]. 华电技术，2013，35(1)：27-29.
[2] IEEE Std 80-2000 IEEE Guide for Safety in AC Substation Grounding[S].
[3] GB 50065—2011 交流电气装置的接地设计规范[S].
[4] 李跃. 国际工程中交流变电站接地设计标准应用研究[J]. 现代制造，2015(36)：146-147.
[5] 杨怀栋. 发电厂和变电站接地设计安全判据的探讨[J]. 电力勘测设计，2013(3)：57-61.
[6] 周建，路平，王锋，等. 采用IEEE标准设计发电厂升压站接地网的研究[J]. 华东电力，2010，38(8)：1251-1255.